press ENTER to accept the current position, thoughthis is not required.Ppos: 2.3nm 130°To Nrst Wpt SLEEnt-OK SEL-Chnge2. Press SEL to change the Seed Position.3. The current Reference Position will be displayedand the Chg? prompt will flash.Ppos: 44°54.46N122°59.69WRef Wpt: Chg?Press ENTER to change the Reference Waypoint orturn the LARGE knob to change to Lat/Lon ReferencePosition. Use the appropriate following description:Change Reference Waypoint or Change Lat/LonReference Position.Change Reference Waypoint1. Press ENTER. The waypoint type will flash. Turnthe SMALL knob to select the waypoint type.AIRPORT PDXPORTLANDCITY OR USA2. Turn the LARGE knob to clockwise (cw) one clickso the first character of the Reference Waypointname will flash. Change the character with the11-6Start Up DisplaysENTERSEL
