CDI ScalingThe CDI Scaling option allows you to select manualor automatic full scale deflection of the internal CDI.Manual full scale deflection options include: 0.30 nm,1.00 nm, and 5.00 nm. Automatic scaling will use 5.00nm as the setting. In an enabled approach operation(GX50/60), scaling is locked in automatic and willchange to the appropriate scale according to yourdistance to the destination waypoint.1. In the Navigation section of the System function,turn the LARGE knob to reach the CDI Scalingpage and then press SEL.CDI ScalingAutomaticªªªªª 5.00nm2. Turn the SMALL knob to select Automatic orManual.CDI ScalingManualªªªªª 5.00nm3. If you chose manual, turn the LARGE knob to moveto the distance value.CDI ScalingManualªªªªª 5.00nm4. Turn the SMALL knob to select the distance valueand then press ENTER.CDI ScalingManual––––– 1.00nm7-10System FunctionsSELENTER
