OBS DTK: 151° toROARK iaf manbrg 356 dtk 3566. If you do not wish to hold or execute a procedureturn at the next waypoint, press OBS/HLD to enablesequencing at the active waypoint. You may alsowant to manually select a flight plan leg tointercept. In this case, press FPL, turn the SMALLknob to the desired leg and press ENTER. PressENTER again to activate it.7. After you have executed the missed approach, youmay want to proceed to another destination or youmay want to execute the same approach or anotherapproach to the same airport.Canceling AnApproachWhenever the Approach Active annunciator is lit, anapproach may be terminated by a single action of thepilot. You may want to cancel an active approach totry the approach again, choose another approach, toproceed to another airport, or in response to an “AbortApproach” message. In any case, you must follow theappropriate missed approach instructions.1. Press the OBS/HLD key to cancel the approach.Canceling an approach does the following:· Sequencing is enabled· The unit returns to Approach Transitionoperations· Approach Active annunciator turns off· Approach annunciator remains turned on· CDI scales to 1 nm full-scale deflection· RAIM alarm limit goes from 0.3 nm to 1.0 nmThough you have canceled the active approach, it isstill loaded and enabled. You may activate a previous9-15Approach Basics (GX50/60)OBS/HLDWPT SEQENTERENTERFPLOBS/HLDWPT SEQ
