suspends leg-sequencing at that waypoint and lightsthe OBS/HLD annunciator.Subsequent pressing of DIRECT-TO toggles betweenthe waypoint selection and OBS DTK choices.ManuallySelecting aFlight planLegApproach operations often result in the need tomanually select a leg of the active flight plan. Manualleg selection will often be required when operatingwith Radar vectors and there is the need to interceptan approach course. It may also occur when flying aDME-ARC to intercept an approach course. Youcannot manually select a DME-ARC as a flight planleg.1. Press FPL to reach the active leg of your flight plan.Then, turn the SMALL knob to display the desiredleg.LGD to BKE2** 146° 28.2nmarpt iaf2. Press ENTER.LGD to BKEPress ENTERto Activate leg3. Press ENTER to accept the displayed destinationwaypoint. The unit will then go to NAV mode.9-19Approach Basics (GX50/60)FPLENTERENTER
