v Follow the suggested actions in the order in which they are listed in the Action column until the problemis solved.v See Chapter 3, “Parts listing, System x3200 M2 Types 4367 and 4368,” on page 33 to determine whichcomponents are customer replaceable units (CRU) and which components are field replaceable units(FRU).v If an action step is preceded by “(Trained service technician only),” that step must be performed only by atrained service technician.System-error log message ActionASM Reset -- reason unknown Information only.ASM Reset due to x, Instruction Fault: y Information only.ASM Reset due Watchdog timeout Information only.ASM Reset was caused by restoring defaultvaluesInformation only.ASM Reset was initiated by the user Information only.Configuration error recovery on the Inter-connectnetworkInformation only.CPU over temperature 1. Make sure that the fan sink has good airflow and is notobstructed.2. Reseat the following components:a. Fan-sink cableb. (Trained service technician only) Fan sinkDASD controller removal 1. Make sure that the mini-PCI-X adapter cable is not damaged.2. Reseat the mini-PCI-X adapter cable.3. Replace the mini-PCI-X adapter cable.DHCP failure,no IP@ assigned-RETRYING!,rc=xxx,count=yyyInformation only.Dialback failed for userid w. Could not connectat phone number x, y, zInformation only.ENET[eee] DHCP-HstNme=a,DN=b,IP@=ccc.ccc.ccc.cccGW@=ddd.ddd.ddd.ddd, NMsk=fff.fff.fff.fff,DNS1@=ggg.ggg.ggg.ggg,DNS2@=hhh.hhh.hhh.hhhInformation only.ENET[eee] IP-Cfg:HstName=x,IP@=ccc.ccc.ccc.ccc, GW@=ddd.ddd.ddd.ddd,NetMsk=fff.fff.fff.fffInformation only.Failure reading an I2C device, possible busfailure 1. Reseat the following components:a. AC power cordsb. Hot-swap power supplies, if any are installedc. Power-supply cables on the system board2. (Trained service technician only) Replace the system board.Fan x Failure 1. Make sure that fan x is not obstructed.2. Reseat the fan x cable.3. Replace fan x.Fan x Outside Recommended Speed 1. Make sure that fan x is not obstructed.2. Reseat the fan x cable.3. Replace fan x.220 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
