– Remote Console RedirectionSelect this choice to enable and configure serial remote video and keyboardredirection.– Internal Floppy SupportSelect this choice to disable or enable the diskette drive.– SATA Programming InterfaceSelect this choice to disable, enable, or configure the Serial ATA.To comply with the 4690 OS requirement, this option provides a Legacy Only(4690) mode that you can select from the menu. When you select the LegacyOnly (4690) mode, this enables the SATA 0 through SATA 3 ports for the4690 OS.– Planar EthernetSelect this choice to disable or enable the Ethernet on the system board.– USB SupportSelect this choice to enable or disable the USB support.– VideoSelect this choice to view the video information.– System MAC AddressesSelect this choice to view the MAC addresses for network devices that areinstalled in the server.v Date and TimeSelect this choice to set the date and time in the server, in 24-hour format(hour:minute:second).This choice is on the Configuration/Setup Utility menu only.v System SecuritySelect this choice to set passwords. See “Using passwords” on page 21 for moreinformation about passwords.– Administrator PasswordThis choice is on the full Configuration/Setup Utility menu only.Select this choice to set or change an administrator password. Anadministrator password is intended to be used by a system administrator; itlimits access to the full Configuration/Setup Utility menu. If an administratorpassword is set, the full Configuration/Setup Utility menu is available only ifyou type the administrator password at the password prompt.– Power-on PasswordSelect this choice to set, change, or delete a power-on password.v Start OptionsSelect this choice to view or change the startup options. Changes in the startoptions take effect when you restart the server.You can set keyboard operating characteristics, such as the keyboard speed, andyou can specify whether the server starts with the keyboard number lock on oroff.You can enable or disable the hard disk drive self-monitoring, analysis, andreporting technology (SMART) function.You can enable a virus-detecting test that checks for changes in the boot recordwhen the server starts.– Startup Sequence Options18 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
