For the program to interface with the mini-baseboard management controller, theparameters in the Intf.ini file must be set correctly. To modify the Intf.ini file, select 0from the main menu and use the arrow keys to select settings for the followingparameters:v System interface: This is the interface through which system software sendsand receives messages to and from the mini-baseboard management controller.Select KCS (keyboard controller style).v Port Address: This is the base address of the system interface.v Register Spacing: Select ByteBoundary, ThirtyTwoBitBoundary, orSixteenBitBoundary.v Channel Number: Use the arrow keys to select the channel number (0 through15).v DHCP Mode: This is the LAN configuration address source.Using the mini-baseboard management controller configurationutility programUse the mini-baseboard management controller configuration utility program to viewor change the mini-baseboard management controller configuration settings and tosave the configuration to a file for use on multiple servers.To download the program, complete the following steps.Note: Changes are made periodically to the IBM Web site. The actual proceduremight vary slightly from what is described in this document.1. Go to http://www.ibm.com/systems/support/.2. Under Product support, click System x.3. Under Popular links, click Software and device drivers.4. Click IBM System x3200 M2 to display the matrix of downloadable files for theserver.5. From the BMC software, copy the file bmc_cfg.exe to a configuration utilitydiskette.To start the mini-baseboard management controller configuration utility program,complete the following steps:1. Turn on the server.2. Insert the configuration utility diskette into the diskette drive.3. From a command line, type bmc_cfg and press Enter.For the program to interface with the mini-baseboard management controller, theparameters in the Intf.ini file must be set correctly. To modify the Intf.ini file, use themini-baseboard management controller setup utility program or a text editor.Using the mini-baseboard management controller firmwareupdates utility programUse the mini-baseboard management controller firmware update utility program todownload a mini-baseboard management controller firmware update. This programupdates the mini-baseboard management controller firmware only and does notaffect any device drivers.Important: To ensure proper server operation, be sure to update themini-baseboard management controller firmware before you update the BIOS code.To download the program, complete the following steps.24 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
