9711MENU SCREEN OPERATION12345678910111213141516171819DD Memory bank link functionSets the memory bank link function ON (default) and OFF. Thelink function provides continuous bank scan, scanning all con-tents in the selected banks during bank scan.• Bank link settingq Rotate [DIAL]† to select the bank that you want to change.w Push [ï](5)† to enter bank setting.e Rotate [DIAL]† to select the setting.r Push [ï](5)† to set and return to the BANK LINK screen.t Rotate [DIAL]† to select next bank and repeat steps w tor, or push [MENU/LOCK] to exit scan set mode. DUP/TONE set mode itemsDD Offset frequencySets the offset frequency for duplex (repeater) operation within0 to 159.995 MHz range.The default value may differ according to the selected fre-quency band (before accessing DUP/TONE set mode) and trans-ceiver version.The selected tuning step in VFO mode is used for settingthe offset frequency.DD Repeater tone frequencySelects subaudible tone frequency for accessing a repeater,etc. Total of 50 tone frequencies (67.0–254.1 Hz) are available.(default: 88.5)88.588.5REPEATER TONE254.1254.1REPEATER TONE0.000.000.000.00OFFSET FREQ159.995.00159.995.00OFFSET FREQONONOFFOFFBANK-ABANK-Ar ONONOFFOFFBANK-ArBANK-A:ONBANK-A:ONBANK-D:ONBANK-D:ONBANK-C:ONBANK-C:ONBANK-B:ONBANK-B:ONBANK-E:ONBANK-E:ONBANK LINKBANK LINKr BANK-V:ONBANK-V:ONBANK-Y:ONBANK-Y:ONBANK-X:ONBANK-X:ONBANK-W:ONBANK-W:ONBANK-Z:ONBANK-Z:ONBANK LINK\r†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
