285 BASIC OPERATION TV channel operationTV channel operation is available only when TV channels areprogrammed using the optional RS-91. (p. 121) Also availablefor A band operation only.D TV channel receivingq Push [CALL] several times to select TV channels.• “TV” and channel number appear.w Rotate [DIAL] to select the desired channel.• While pushing and holding [BAND], rotating [DIAL] selects theall channels including skip channel.D Skip channel settingUnwanted channels can be skipped for rapid selection, etc.q Push [CALL] several times to select TV channels.• “TV” and channel number appear.w Rotate [DIAL] to select the channel to be skipped.• To clear the skip setting, rotate [DIAL] while pushing and holding[BAND] to select a skip channel.e Push and hold [SKIP](5) for 1 sec. to toggle the skip set-ting ON and OFF.• “SKIP” appears when the channel is set as skip channel.D Automatic TV channel programmingTV channels can be programmed automatically.q Push [CALL] several times toselect TV channels.• “TV” and channel number ap-pear.w Push [SCAN](2) to start TVchannel programming.• The programming will automati-cally stop after scanning all channels.TVTVAMemoNameμPRIOPRIO WXWX EMREMRDTCSDTCSWFMWFMLOWLOWATTATT2 chP SKIP+DUP+DUP25TVTVAMemoNameμPRIOPRIO WXWX EMREMRDTCSDTCSWFMWFMLOWLOWATTATT12 chP SKIP+DUP+DUP25[DIAL] AppearsTVTVAMemoNameMemoNameμPRIOPRIO WXWX EMREMRDTCSDTCSWFMWFMLOWLOWATTATT10 chP SKIP+DUP+DUP25TV mode indicationChannel indication[DIAL]
