557DV MODE OPERATION (Optional UT-121 is required)7DD Voice memory recording for automatic replyqSelect DV mode in B band, and deactivate the prioritywatch (p. 83) if activated.w Enter “REPLY VOICE” in DV voice memo set mode.• REPLY VOICE screen is displayed.eWhile pushing and holding [PTT], speak into the micro-phone.• Up to 10 seconds of message is recordable.• The recording stops after 10 second or when [PTT] is released.r Push [ΩΩ](4) to return to DV VOICE MEMO screen.t Push [MENU/LOCK] to return to frequency indication.DD Play-back or erase the voice memoryq Push [MENU/LOCK] to select menu mode indication.wRotate [DIAL]† to select “DV VOICE MEMO,” then push[ï](5)†.eRotate [DIAL]† to select “REPLY VOICE,” then push[ï](5)†.• REPLY VOICE screen is displayed.rTo play-back the recorded voice memory, push [ï](5).• Push [ï](5) again to pause, push [≈≈](6) to cancel the play-back.tTo erase the recorded voice memory, push and hold[CLR](1) for 1 sec.REPLY VREPLY VPTT:PTT::BACK:BACK CLR:CLRCLR:CLRREPLY VOICEREPLY VOICE:rMENU screen ➪ DV VOICE MEMO ➪ REPLY VOICE(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)IMPORTANT!Deactivate the dualwatch function and set minimum [VOL]level when recording the DV voice memo.Otherwise received audio or unwanted noise from A band isalso recorded into the voice memory.†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)1234568910111213141516171819
