607 DV MODE OPERATION (Optional UT-121 is required)DD GPS message automatic transmissionq Enter “GPS AUTO TX” in DV set mode. (p. 95)• GPS AUTO RX screen is displayed.wRotate [DIAL]† to select the desired position data transmit-ting interval from 5 sec., 10 sec., 30 sec., 1 min., 3 min.,5 min., 10 min., 30 min. and OFF.• The position data is transmitted only when [PTT] is pushed withOFF setting, the data is transmitted automatically once every5 sec., 10 sec., 30 sec., 1 min., 3 min., 5 min., 10 min. and30 min. when the appropriate setting is selected.• The GPS message is also transmitted if programmed.ePush [ï](5) (or [ΩΩ](4)) to return to DV SET MODE screen.r Push [MENU/LOCK] to return to frequency indication.NOTE: Your own call sign (“MY”) should be set to activatethe GPS automatic transmission.DD Position indicationq Enter “POSITION” in message/position set mode.• GPS POSITION screen is displayed.wRotate [DIAL]† to select the received position data indica-tion.ePush [ï](5) (or [ΩΩ](4)) to return to MESSAGE/POSITIONscreen.r Push [MENU/LOCK] to return to frequency indication.MY POSITIONGPS POSITIONGPS POSITIONr34.56.789 N34.56.789 N123.45.678 E123.45.678 E:RX POS:RX POS:BACK:BACKMENU screen ➪ MESSAGE/POSITION ➪ POSITION(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)OFF5SEC5SEC10SEC10SEC30SEC30SEC1MIN1MINGPS AUTO TXGPS AUTO TXrMENU screen ➪ DV SET MODE ➪ GPS AUTO TX(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)
