427 DV MODE OPERATION (Optional UT-121 is required)DD Repeater operation in the same zoneqSet the desired repeater’s frequency, offset and shift direc-tion in B band. (pgs. 18, 32)• Select DV mode in advance. (p. 21)w Set your own call sign. (p. 38)• See p. 34 for your own call sign programming.e Set the desired station call sign. (p. 39)• See p. 36 for station call sign programming.r Set the repeater’s call sign as follows;z Enter “R1” in call sign set mode.xRotate [DIAL]† to select the nearest repeater’s call sign.cPush [ï](5) to set the call sign for “R1.”• Return to CALL SIGN screen.vRotate [DIAL]† to select “R2” then push [ï](5)†.• RPT2 CALL SIGN screen is displayed.bRotate [DIAL]† to select the desired repeater’s (in thesame zone) call sign.• Select “NOT USE✱” when not operating RPT2.nPush [ï](5) to set the call sign for “R2.”• Return to CALL SIGN screen.mPush [MENU/LOCK] to return to frequency indication.t Push [PTT] to transmit; release to receive.UR:CQCQCQUR:CQCQCQR1:RPT1AAR1:RPT1AAR2:NOT USE*R2:NOT USE*MY:MYCALLMY:MYCALL/IC91/IC91CALL SIGNrMENU screen ➪ CALL SIGN ➪ R1(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
