Icom IC-E91 Instruction Manual

Also see for IC-E91: Instruction manual Service manual

Contents

367 DV MODE OPERATION (Optional UT-121 is required)DD Station call sign programmingStation call sign must be programmed for the specified sta-tion call as well as repeater operation in both digital voice andlow-speed data communications.q Select B band as the main band. (p. 14)w Enter “UR” in call sign set mode.• YOUR CALL SIGN screen is displayed.e Rotate [DIAL]† to select the desired call sign memory,“U01” to “U60.”r Push [≈≈](6) to enter call sign programming mode.• The 1st digit blinks.t Rotate [DIAL]† to select the desired character or code.• Push [A/a](3) to change the character group from “AB” (alpha-betical characters; capital letters), “12” (numbers) and “/” (sym-bols) in sequence.y Push [≈≈](6) to select 2nd digit, then rotate [DIAL]† to se-lect the desired character or code.• Push [≈≈](6) to move the cursor right; push [ΩΩ](4) to move thecursor left.• 2nd digit blinks (1st digit stops blinking).u Repeat the steps t and y to enter the desired station callsign.• Up to an 8-digit of call sign can be set.• If an un-necessary character is entered, push [≈≈](6) or [ΩΩ](4) toselect the character, then push [CLR](1) to erase the selectedcharacter, or push and hold [CLR](1) for 1 sec. to erase all char-acters following the cursor.i Push [ï](5) to store the programmed call sign and returnsto YOUR CALL SIGN screen.o Push [MENU/LOCK] to return to frequency indication.U01U01STATION1STATION1:SET:BACK:SEL:EDITCLR:CLRYOUR CALL SIGNrU01 ABS†:SET:SET:SEL:SEL:CUR:CURCLR:CLRCLR:CLRA/a:CHARA/a:CHAR0:CQ0:CQYOUR CALL SIGNYOUR CALL SIGNrU01U01 ABAB†:SET:SET:SEL:SEL:CUR:CURCLR:CLRCLR:CLRA/a:CHARA/a:CHAR0:CQ0:CQYOUR CALL SIGNYOUR CALL SIGNrUCQCQCQCQCQCQ:SET:BACK:SEL:EDITCLR:CLRYOUR CALL SIGNrMENU screen ➪ CALL SIGN ➪ UR(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)