64MEMORY/CALL CHANNELS8 General descriptionThe IC-E91 has 850 memory channels in A band, 450 mem-ory channels in B band, and 2 call channels in each band.Memory channels in each bands including 50 scan edgememory channels (25 pairs) for storage of often-used frequen-cies, respectively.And a total of 26 memory banks, A to Z, are available in eachbands for storing groups of frequencies, etc. Up to 100 chan-nels can be assigned into a bank.DD Memory channel contentsThe following information can be programmed into memorychannels:• Operating frequency (p. 18)• Operating mode (p. 21)• Duplex direction (+DUP or –DUP) with an offset frequency(p. 32)• Subaudible tone encoder (p. 107), tone squelch or DTCSsquelch ON/OFF (p. 110)• Subaudible tone frequency (p. 107) , tone squelch fre-quency or DTCS code with polarity (pgs. 107, 111)• Scan skip information (p. 80)• Memory bank (p. 67)• Memory name (p. 70)• Tuning step (p. 18)• Call sign squelch or Digital code squelch* (p. 110)• Station call sign* (p. 36)• RPT1/RPT2 call sign* (p. 41)*Available for B band operation only. Selecting a memory channelDD Using [DIAL]— Programmed channelsqPush [MR] to select memory mode.wRotate [DIAL] to select the desired memory channel.• Only programmed channels are displayed.DD Using [DIAL]— All channelsqPush [MR] to select memory mode.wPush and hold [S.MW](MR) for 1 sec. to enter select mem-ory write mode.• 1 short and 1 long beep sound.• “μμ ” indicator blinks.eRotate [DIAL] to select the desired memory channel.• All channels are displayed.• Push [VFO] to return to memory mode indication.[DIAL]AμFMFM145 000000000AppearsRotate [DIAL] to selectthe memory channel.
