799SCAN OPERATION12345678910111213141516171819 Skip channel/frequency settingMemory channels can be set to be skipped for memory skipscan. In addition, memory channels can be set to be skippedfor both memory skip scan and frequency skip scan. Theseare useful to speed up the scan rate.q Select a memory channel:➥ Push push [MR] to select memory mode.➥ Rotate [DIAL] to select the desired channel to be a skipchannel/frequency.wPush and hold [S.MW](MR) for 1 sec. to enter select mem-ory write mode.ePush [∫∫](2) or [√√](8) several times to select “SKIP.”rRotate [DIAL] to select the skip condition from “SKIP,”“P SKIP” or “OFF” for the selected channel.• P SKIP: The channel is skipped during memory/bank scan andthe programmed frequency is skipped during VFO scan,such as programmed scan.• SKIP : The channel is skipped during memory or bank scan.• OFF : The channel is scanned during any scan.(Continue to the next page.)145 870BANK :----MNAME:SKIP :OFFFMFMr μ 020145 870MNAME:SKIP :OFFCLEARFMFMrμ 020orseveral times.PushFMFMAμ 020020145 870[DIAL]
