Priority watch operationDD Memory/call channel and memory scan watchq Select VFO mode; then, set an operating frequency.w Set the watching channel(s).For memory channel watch:Select the desired memory channel.For call channel watch:Select the desired call channel.For memory scan watch:Select memory mode, or the desired bank group; then,push and hold [SCAN](2) for 1 sec. to start memory/bankscan.e Enter “PRIO WATCH” in scan set mode. (p. 96)r Rotate [DIAL]† to select “ON.”• Select “BELL” if the priority beep function is desired.t Push [MENU/LOCK] to exit scan set mode and start thewatch.• “PRIO” indicator appears.• The transceiver checks the memory/bank channel(s) or callchannel every 5 sec.• The watch resumes according to the selected scan resume con-dition. (p. 81)y Push [VFO] to cancel the watch.• During priority watchMonitors VFO frequencyfor 5 sec.Pauses on a memory orcall channel when a sig-nal is received.• During priority watch with priority beepEmits beep and blinks “S” indicator when a signal is re-ceived on a memory or call channel.PRIOPRIOFMFMA 145 180μ 035035PRIOPRIOFMFMA 433 260P SKIPSKIPPRIOPRIOFMFMA 145 180μ 035035PRIOPRIOFMFMA 433 260P SKIPSKIPMENU screen ➪ SCAN ➪ PRIO WATCH(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)Although [DIAL] and [ï](5) are used for description in thissection, [∫∫](2)/[√√](8) and [≈≈](6) are available instead of[DIAL] and [ï](5).8310PRIORITY WATCH12345678910111213141516171819†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
