10712OTHER FUNCTIONS12345678910111213141516171819D Setting subaudible tones for repeater ortone squelchq Enter “CTCSS TONE (or RPT TONE)” in DUP/TONE… setmode. (pgs. 97, 98)w Rotate [DIAL]† to select the desired repeater or CTCSStone frequency.• Each operating band and each memory channel have indepen-dent settings.• See page 98 for available tone frequencies for details.e Push [ï](5) (or [ΩΩ](4)) to return to DUP/TONE… set mode,and push [MENU/LOCK] to return to frequency indication.D Setting DTCS code for DTCS squelch orbeepq Enter “DTCS CODE” in DUP/TONE... set mode. (p. 98)w Rotate [DIAL]† to select the desired DTCS tone code.• Each operating band and each memory channel have indepen-dent settings.• See page 98 for available DTCS codes for details.e Push [ï](5) (or [ΩΩ](4)) to return to DUP/TONE… set mode,and push [MENU/LOCK] to return to frequency indication.DTCS phase mode can be selected in “DTCS POLARITY”menu. (p. 99)DV SET MODESCANrDUP/TONE...***** MENU *****88.5200500r300CTCSS TONE88.5200500r300REPEATER TONEDV SET MODESCANrDUP/TONE...***** MENU *****023023200200500500r300300DTCS CODEMENU screen ➪ DUP/TONE... ➪ DTCS TONE(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)DV SET MODESCANrDUP/TONE...***** MENU *****88.588.5200200500500r300300CTCSS TONECTCSS TONE88.588.5200200500500r300300REPEATER TONEDV SET MODESCANrDUP/TONE...***** MENU *****023200500r300DTCS CODEMENU screen ➪ DUP/TONE... ➪ CTCSS TONE(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
