477DV MODE OPERATION (Optional UT-121 is required)7DD One-touch reply using the call recordThe stored call signs in the call record can be used to the call.qAfter receiving a call, push and hold [RX➝CS](CALL) for1 sec.Or, while pushing and holding [RX➝CS](CALL), rotate[DIAL] to select the desired call sign record.• Set your own call sign (MY) in advance. (p. 34)• The call sign stored in “CALLER” is stored as “UR,” “RXRPT1” isstored as “R2” and “RXRPT2” is stored as “R1.”• Error beeps sound when a call sign is received incorrectly, andno call sign is set in this case.wPush [PTT] to transmit; release to receive.✔ For your informationWhen a call specifying your call sign is received, the call signsof the calling station and the repeater it is using can be usedfor operation automatically.• When “RX call sign auto write” (p. 93) is set to “AUTO,” thestation call sign in “CALLER” is set to “UR” automatically.• When “Repeater call sign auto write” (p. 93) is set to “AUTO,”the stored station call sign in “RXRPT1” is stored as “R2”and “RXRPT2” is stored as “R1” automatically.Important!Setting call signs with the “One-touch reply using the callrecord” operation as at left are for temporary operation only.Therefore, the set call signs will be overwritten when an-other call record is used to set call signs.• Never saved into a call sign memory.If you want to save the set call signs, see “Copying the callrecord contents into call sign memory” (p. 50) for details.DVDVB 439 706-DUP-DUP25AAAAAAThe received call sign is displayed while pushing andholding [CALL/RX➝CS] when [DIAL] is rotated while[CALL/RX➝CS] is pushed.1234568910111213141516171819
