Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

17 Field Programming Reference (FPRG) Version: 1.016 EDIT MENU6.1 Channel InformationIt can configure the channel data to transmit/receive onthe “Channel Information” window. You can configure thedata a maximum of 16 channels.Figure 6-1 Channel Information window6.1.1 Reception FrequencyIt can configure the Reception Frequency in this window.You can directly enter the value in the edit box.Note:! The frequency range varies depending on the model and themarket code. (Refer to FUNC 1.2 Transmission/ReceptionFrequency.)! You can use numbers, “.”, and “,” for the 9 digits of thefrequency.! You must enter the value within the range when configuring thefrequency. When entering the frequency, which is out of therange, it will be automatically replaced with the highest value orthe lowest value within the range configured in “ModelInformation” > “Frequency” window. (Refer to 5.1 ModelInformation.)! You must configure the “Reception Frequency” first beforeconfiguring other functions. On the other hand, the otherfunctions are reset when clearing the frequency configured inthe “Reception Frequency” window.6.1.2 Transmission FrequencyYou can configure the Transmission Frequency in thiswindow. You can directly enter the value in the edit box.Note:! The frequency range varies depending on the model and themarket code. (Refer to FUNC 1.2 Transmission/ReceptionFrequency.)! You can use numbers, “.”, and “,” for the 9 digits of thefrequency.! You must enter the value within the range when configuring thefrequency. When entering the frequency, which is out of therange, it will be automatically replaced with the highest value orthe lowest value within the range configured in “ModelInformation” > “Frequency” window. (Refer to 5.1 ModelInformation.)6.1.3 QT/DQT DecodeIt can configure the signalling used to receive a call. Youcan select the QT tone or DQT code from the dropdownlist. You can also directly enter the QT tone and the DQTcode.Note:! When both of the QT Encode and the QT Reverse Burstfunctions are enabled, the repeater transmits the QT ReverseBurst tone at end of transmission.! When the DQT Encode is selected, the TKR-750/850/751/851transmits the DQT Turn-off Code.# Selecting the QT/DQT Decode Code from theDropdown list:# Directly entering the QT/DQT Decode Code:Note:! You can use numbers, “D”, “N”, “I”, “.”, and “,” for the 5 digits ofthe QT/DQT Encode code.! When entering only numbers, the code is automaticallyconfigured as the QT Tone.! When entering “D” as the first character of the code, the code isautomatically configured as the DQT code.! When entering the value, which is out of the range, it will beautomatically replaced with the highest value or the lowest valuein the range.Range TKR-750/751 100.00000 - 280.00000 MHzTKR-850/851 327.00000 - 550.00000 MHz(Common to all ranges)Default BlankRangeTKR-750/751 100.00000 - 280.00000 MHzTKR-850/851 327.00000 - 550.00000 MHz(Common to all ranges)Default BlankRangeQT 67.0 - 250.3 HzDQT Normal D023N - D754NDQT Inverse D023I - D754IDefault NoneRangeQT 67.0 - 254.1 HzDQT Normal D000N - D777NDQT Inverse D000I - D777IIn steps of QT 0.1 HzDQT 1Default None