Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

6 EDIT MENU49 Field Programming Reference (FPRG) Version: 1.016.10.2 AUX TabIt can configure functions assigned to the AUX Input port,AUX Output port, and the AUX Input/Output port in thistab.Figure 6-20 AUX tab" AUX Input Trigger (AUX Input)This is a method to detect the signal applied to theAuxiliary Input ports Select “Level” or “Down Edge”from the dropdown list.Note: Although TKR-750/850/751/851 performs the detectionwhen the detection is enabled, it performs Start Up firstwhen Start Up is enabled when the “Level” is selected.(Refer to 6.4.3 Others Tab (Optional Features).)" 1st, 2nd, 3rd (AUX Input)You can assign three functions (1st, 2nd, and 3rd) tothe AUX Input port and the AUX Input/Output port.Select the functions from the dropdown list.Note:! As for the AUX Input/Output port, it appears on the list onlywhen it is configured as the “AUX Input” port in the “AUXSelect” tab. (Refer to 6.10.1 AUX Select Tab.)! It cannot configure any functions to “2nd” and “3rd” when“1st” is configured as “None”, and it cannot configure anyfunctions to “3rd” when “2nd” is configured to “None”.Table 6-6 Assigning Functions to the Auxiliary Input Ports(Functions in GLAY are available onlywhen Down Edge is detected.)RangeLevel Perform the trigger detection when theport is in Active Low.Down Edge Perform the trigger detection withDown Edge on the input signal.Default LevelRange Refer to Table 6-6 Assigning Functions to theAuxiliary Input Ports.Default1st: None2nd: Cannot be configured.3rd: Cannot be configured.Function Name DescriptionNone Not perform any operation.AUX Out 1 Off-AUX Out 5 OffWhen the signal is applied to one of the PF [AUX Out 1 Off] - PF [AUX Out 5 Off] input ports, the functionassigned to the Auxiliary Output port is deactivated.You can assign this function when “Selectable” is configure to the Auxiliary Output ports 1 to 5. (Refer to Table6-7 Assigning Functions to the Auxiliary Output Ports.)AUX I/O 1 Off-AUX I/O 6 OffWhen the signal is applied to one of the PF [AUX Out 1 Off] - PF [AUX Out 6 Off] input ports, the functionassigned to the Auxiliary I/O port is deactivated.You can assign the function when “Selectable” is configured to the Auxiliary I/O ports 1 to 6. (Refer to Table 6-7Assigning Functions to the Auxiliary Output Ports.)AUX Out 1 On-AUX Out 5 OnWhen the signal is applied to one of the PF [AUX Out 1 On] - PF [AUX Out 5 On] input ports, the functionassigned to the Auxiliary Output port is activated.You can assign this function when “Selectable” is configure to the Auxiliary Output ports 1 to 5. (Refer to Table6-7 Assigning Functions to the Auxiliary Output Ports.)AUX I/O 1 On-AUX I/O 6 OnWhen the signal is applied to one of the PF [AUX I/O 1 On] - PF [AUX I/O 6 On] input ports, the functionassigned to the Auxiliary I/O port is disabled.You can assign the function when “Selectable” is configured to the Auxiliary I/O ports 1 to 6. (Refer to Table 6-7Assigning Functions to the Auxiliary Output Ports.)AUX Out 1 On/Off-AUX Out 5 On/OffSwitch enable/disable the function assigned to the Auxiliary Output port when the signal is applied to one of thePF [AUX Out 1 On/Off] to PF [AUX Out 5 On/Off] input ports.You can assign this function when “Selectable” is configure to the Auxiliary Output ports 1 to 5. (Refer to Table6-7 Assigning Functions to the Auxiliary Output Ports.)