Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

Version: 1.01 Field Programming Reference (FPRG) 586 EDIT MENU6.15 Embedded Message w/Password WindowIt can configure a message and a password into the TKR-750/850/751/851 on the “Embedded Message w/Password” window. You can configure a message with upto 64 characters (combination of alphabets and numerals)to the repeater. You can also configure the password toprotect the message. You can embed the specificinformation in it, such as the control number or the name ofthe configuration data written with a password.Figure 6-24 “Embedded Message w/Password” windowDirectly enter the message in the edit box." Write ButtonThis can write the configured message into the TKR-750/850/751/851.Follow the procedures below to write the message.1. Click “Write”.The Password Entry display appears.Figure 6-25 Password Entry displayNote: The display requiring you to configure the passwordwhen the password is not configured. You mustconfigure the password first, then you can write theconfigured message.2. Enter the password and click “Write”.3. Click “OK”.Note:! The error message appears if you enter an incorrectpassword.! The password entry display closes when entering a wrongpassword three times in a row.! When writing the message with Embedded Message w/Password, you can store the message as a separate datafrom the configuration data." Password ButtonIt can configure the password and change it.Follow the procedures below to configure/change thepassword.1. Click “Password”.The “Caution” window appears. Click “OK” to viewthe “Password Change” window.Figure 6-26 “Caution” windowFigure 6-27 “Password Change” window2. Enter the password.You can configure a password a maximum of 6characters.Old Password: Enter the old password in this box.New Password: Enter the new password.Confirm: Enter the same password as the “NewPassword” to confirm.3. Click “Write”.4. Click “OK”.Note:! The error message appears when the password entered inthe “Old Password” box does not match with the registeredpassword.! The error message appears when the password entered inthe “New Password” box does not match with the passwordentered in the “Confirm” box.! The password entry display closes when entering anincorrect password three times in a row.Range Maximum of 64 characters and symbols.Default Blank