Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

6 EDIT MENU39 Field Programming Reference (FPRG) Version: 1.016.6 Scan Information WindowIt can configure the Scan operation and conditions on the“Scan Information” window. (Refer to FUNC 16 Scan.)Figure 6-13 Scan Information window6.6.1 PriorityThis is a priority channel type to be scanned periodically.You can select the mode from None, Fixed, and Selectedfrom the dropdown list.TKR-750/850/751/851 scans channels in numerical order(Normal Scan) when the priority scan function is selectedNone.Note:! You cannot configure the Priority Channel, Look Back Time A,and Look Back Time B when priority is configured as “None”.! You cannot configure the Priority Channel when priority isconfigured as “Selected”.6.6.2 Priority ChannelThis is a channel to be scanned periodically when TKR-750/850/751/851 is scanning.Select the channel configured as the Priority Channelfrom the dropdown list or directly enter the channelnumber.Note:! You cannot configure this function if the “Priority” is configured to“None” or “Selected”.! The dropdown list only displays the channel having theconfiguration data.6.6.3 Look Back Time AThis is a interval time to check the priority channel whenthe scan is stopping on the normal channel and no signalis on the priority channel. Configure the period by the spinbuttons or directly enter the value to configure the period.Note: It pauses on the Priority Channel when there is a signal toreceive and the signalling matches while scanning thePriority Channel.6.6.4 Look Back Time BThis is a interval time to check the priority channel whenthe scan is stopping and a signal without same signallingis on the priority channel. Configure the period by the spinbuttons or directly enter the value to configure the period.Note: It pauses on the Priority Channel when there is a signal toreceive and the signalling matches while scanning thePriority Channel.6.6.5 Revert ChannelThis is a condition of channel to transmit during scanning.Select the condition from the dropdown list.RangeNone Not perform the Priority Scan.Fixed The channels configured as the prioritychannel are scanned periodically.SelectedThe selected channel is configured asthe priority channel when changing thechannel.Default NoneRange 1 - 16Default NoneRange 0.5 - 5.0 sec.In steps of 0.1 sec.Default 0.5 sec.Range 0.5 - 5.0 sec.In steps of 0.1 sec.Default 2.0 sec.RangeLast CalledLast UsedSelectedSelected + TalkbackPriorityPriority + TalkbackDefault Last Called