Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

Version: 1.01 Field Programming Reference (FPRG) 32 BASIC OPERATIONThis section describes basic operations of the KPG-91D.Note:! The TKR-750/850 automatically enters PC mode when readingor writing the programming data. (Refer to FUNC 1.5 Mode.)! We recommend you storing the data configured by the KPG-91Dto the hard disc or the external storage device. (Refer to 4 FILEMENU.)2.1 Starting and ExitingSelect “Start” > “All programs” > “KENWOOD FPU” >“KPG-91D” in order to start the KPG-91D.Note: You can start the KPG-91D by opening the folder in whichyou installed the KPG-91D and double-clicking the“kpg91d.exe” file.The Main window of the KPG-91D appears.The splash logo appears in the center of the screen for awhile and it automatically disappears. You can also makethe logo disappear by pressing any key on the keyboardor clicking a mouse button.Select “File” > “Exit” to exit the KPG-91D.2.2 Initializing the windowSelect the model type to configure. (Refer to 5 MODELMENU.)Model name, model type, frequency bandwidth, and datafile name appear on the title bar located on the top of thewindow.2.3 Write the Configuration DataFollow the procedures below to edit and write theconfiguration data.1. Enter all the necessary data.Select the item that you want to configure in the “Edit”menu and enter data in the window. (Refer to 6 EDITMENU.)2. Write the updated data to the repeater.Select “Program” > “Write Data to Repeater”. (Refer to7 PROGRAM MENU.)2.4 Modify the ConfigurationDataFollow the procedures below to edit and write theconfiguration data.1. Read the configuration data from the TKR-750/850.Select “Program” > “Read Data from Repeater”.(Refer to 7 PROGRAM MENU.)2. Edit the data on the computer.Select the item that you want to edit in the “Edit” menuand enter data in the window. (Refer to 6 EDITMENU.)3. Write the updated data to the TKR-750/850.Select “Program” > “Write Data to Repeater”. (Refer to7 PROGRAM MENU.)2.5 Edit the stored Data andWriteFollow the procedures below to edit and write theconfiguration data.1. Open the configuration data stored in the hard diskdrive or other storage devices.Select “File” > “Open”. (Refer to 4 FILE MENU.)2. Edit the file data on the computer.Select the item that you want to edit in the “Edit” menuand enter data in the window. (Refer to 6 EDITMENU.)3. Write the updated data to the TKR-750/850.Select “Program” > “Write Data to Repeater”. (Refer to7 PROGRAM MENU.)2.6 Display HelpClick “Help” located on each window to open the “KPG-91D HTML Help” window. (Refer to 12 HELP MENU.)