Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

Version: 1.01 Field Programming Reference (FPRG) 226 EDIT MENU6.2.2 Transmission FrequencyIt can configure a Frequency to transmit. Enter a value inthe edit box. directlyNote:! The frequency range varies depending on the model and themarket code. (Refer to FUNC 1.2 Transmission/ReceptionFrequency.)! It can use numbers, “.”, and “,” for the 9th digit of the frequency.! You must enter the value within the range when configuring thefrequency. When entering the frequency, which is out of therange, it will be automatically replaced with the highest value orthe lowest value within the range configured in “ModelInformation” > “Frequency” window. (Refer to 5.1 ModelInformation.)6.2.3 QT/DQT DecodeIt can configure a signalling to receive a call. Select a QTtone or DQT code from the dropdown list. You can alsodirectly enter the QT tone and the DQT code.Note:! When both of the QT Encode and the QT Reverse Burstfunctions are enabled, the TKR-750/850/751/851 transmits a QTReverse Burst code at end of transmission.! When the DQT Encode is selected, the TKR-750/850/751/851transmits a DQT Turn-off Code.# Selecting the QT/DQT Decode Code from theDropdown List:# Directly entering the QT/DQT Decode Code:Note:! You can use numbers, “D”, “N”, “I”, “.”, and “,” for the 5th digit ofthe QT/DQT Encode code.! When entering only numbers, the code is automaticallyconfigured as the QT Tone.! When entering “D” as the first character of the code, the code isautomatically configured as the DQT code.! When entering the value, which is out of the range, it will beautomatically replaced with the highest value or the lowest valuein the range.6.2.4 QT/DQT EncodeIt can configure a signalling to make a call. You can selecta QT tone or DQT code from the dropdown list. You canalso directly enter the QT tone and the DQT code.# Selecting the QT/DQT Encode Code from theDropdown list:# Directly entering the QT/DQT Encode Code:Note:! You can use numbers, “D”, “N”, “I”, “.”, and “,” for the 5 digits ofthe QT/DQT Encode code.! When entering only numbers, the code is automaticallyconfigured as the QT Tone.! When entering “D” as the first character of the code, the code isautomatically configured as the DQT code.! When entering the value, which is out of the range, it will beautomatically replaced with the highest value or the lowest valuein the range.6.2.5 Channel NameIt can configure the Channel Name. The configuredchannel name appears on the Channel/Status displaywhen selecting the channel with the PF key. (Refer toFUNC 1.6 Display.)RangeTKR-750/751 100.00000 - 280.00000 MHzTKR-850/851 327.00000 - 550.00000 MHz(Common to all ranges)Default BlankRangeQT 67.0 - 250.3 HzDQT Normal D023N - D754NDQT Inverse D023I - D754IDefault NoneRangeQT 67.0 - 254.1 HzDQT Normal D000N - D777NDQT Inverse D000I - D777IIn steps of QT 0.1 HzDQT 1Default NoneRangeQT 67.0 - 250.3 HzDQT Normal D023N - D754NDQT Inverse D023I - D754IDefault NoneRangeQT 67.0 - 254.1 HzDQT Normal D000N - D777NDQT Inverse D000I - D777IIn steps of QT 0.1 HzDQT 1Default NoneRange2 digits0 - 9, A, b, c, d, E, F, G, H, i, J, L, n, o, P, q, r, S,t, U, y, -, =, _Default Channel Number (1 - 16)