Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

6 EDIT MENU55 Field Programming Reference (FPRG) Version: 1.016.12 CW Message WindowIt can configure the CW Message to send on this window.You can send the configured CW Message by interlockingwith the operation of function keys and the input/outputoperation of the Auxiliary port. (Refer to 13 FUNCTIONLIST.)It can control the transmission of CW Message with thefollowing functions.# Key FunctionTKR-750/850/751/851 sends the configured CWMessage when the PF key is pressed if the CWMessage transmission function is assigned to the PFkey. (Refer to 6.5 Key Assignment Window.)# Auxiliary Input portTKR-750/850/751/851 sends CW Message when thesignal is applied to the Auxiliary Input port if the CWMessage transmission function is assigned to theAuxiliary Input port. (Refer to Table 6-6 AssigningFunctions to the Auxiliary Input Ports.)# Save On/Off FunctionTKR-750/850/751/851 sends CW Message when itenters/exists Power Saver mode if the CW Messagetransmission function is assigned to the Save On/Offfunction. (Refer to 6.4.3 Others Tab (OptionalFeatures).)# Start Up FunctionTKR-750/850/751/851 sends CW Message when it isturned ON if the CW Message transmission function isassigned to Start Up. (Refer to 6.4.3 Others Tab(Optional Features).)# Backup Power FunctionTKR-750/850/751/851 sends CW Message when thepower is switched from the main power to the backuppower if the CW Message transmission function isassigned to the Backup Power function. (Refer to6.4.3 Others Tab (Optional Features).)# Main Power FunctionTKR-750/850/751/851 sends CW Message when thepower is switched from the backup power to the mainpower if the CW Message transmission function isassigned to the Main Power function. (Refer to 6.4.3Others Tab (Optional Features).)Figure 6-21 “CW Message” window6.12.1 CW MessageIt can configure CW Message with a maximum of 32characters and symbols. Enter directly the message inthe edit box.6.12.2 CW SpeedThis is a speed to send CW Message. It can configure thespeed by the spin buttons or directly enter the value toconfigure the speed.6.12.3 CW Mod. Delay TimeThis is a duration time to send CW message from startstransmitting. It can configure the duration by the spinbuttons or directly enter the value to configure theduration.RangeNo. 1 - 8A maximum of 32 characters and symbols(space), “, ', (,), +,,, -,., /, 0, 1, 2, 3, 4, 5, 6, 7, 8,9,:, =,?A - ZDefault BlankRange 5 - 30 word/min.In steps of 1 word/min.Default 20 words/min.Range 0, 10 - 2550 msIn steps of 10 msDefault 600 ms