7 PROGRAM MENU62 Field Programming Reference (FPRG) Version: 1.017.3.3 Wide/ NarrowIt can select the Bandwidth for the Test Channel. Selectfrom Wide and Narrow from the dropdown list. (Refer toFUNC 1.4 Transmission Bandwidth.)7.3.4 Beat Shift (Test Mode)It can select the Beat Shift function to the Test Channel.The Beat Shift function eliminates the problems of theinternal beat caused by internal oscillators. Select “Yes”or “No” from the dropdown list.7.3.5 Power (Test Mode)It can select the transmit output power for the TestChannel. Select “High” or “Low” from the dropdown list.7.3.6 Monitor (Test Mode)It can enable/disable Squelch of the Test Channel. Select“Off” or “On” from the dropdown list.7.3.7 Compander (Test Mode)It can select Compander for the Test Channel. Thisfunction improves the quality of the received tone byreducing the noise. Select “Off” or “On” from thedropdown list.7.3.8 RepeatIt can configure Repeat operation to the Test Channel.Select “Off” or “On” from the dropdown list.7.3.9 TX/RX ButtonClick “TX/RX” to toggle between transmission andreception.7.3.10 Print ButtonClick “Print” to print out the configured Tuning Data.7.3.11 Tuning ModeIt can make various adjustments for the TKR-750/850/751/851 by the KPG-91D.Double-click the function in the list box in the “Test Mode”window to view the adjustment window of the selectedfunction. (Refer to Table 7-2 Functions that you can adjustin PC Tuning Mode.)Figure 7-4 Example: “Frequency Adjustment” windowNote: Refer to the Service Manual how to adjust the TKR-750/850/751/851 also.Range Wide, NarrowDefault WideRange Yes The Beat Shift function is enabled.No The Beat Shift function is disabled.Default NoRange High, LowDefault HighRange Off Squelch is disabled.On Squelch is enabled.Default OffRange Off Compander is disabled.On Compander is enabled.Default OffRange Off Repeat is disabled.On Repeat is enabled.Default Off