Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

Version: 1.01 Field Programming Reference (FPRG) 406 EDIT MENUTable 6-4 Revert Channel ConfigurationNote: You are able to configure the channel used for the repeatoperation as a Priority Channel. (Refer to 6.6.2 PriorityChannel.)Although TKR-750/850/751/851 performs the repeatoperation on the Priority Channel when receiving a call onthe Priority Channel, it transmits with the channel matchingthe conditions configured in the Revert Channel functionwhen receiving the transmission request having higherpriority than the transmission with the repeater PTT.6.6.6 Dropout Delay TimeThis is a duration time that TKR-750/850/751/851automatically resumes the Scan after the receiving signalis disappear.Configure the duration by the spin buttons or directlyenter the value to configure the duration.TKR-750/850/751/851 to resume scanning with thefollowing conditions.• There is no signal to receive.• The received QT/DQT code becomes un-match.6.6.7 Dwell TimeThis is a duration to resume scanning after stoptransmitting.TKR-750/850/751/851 pauses scanning if the PTT switchis pressed to transmit during the scan and resumesscanning after the transmission ends. Configure theduration by the spin buttons or directly enter the value toconfigure the duration.6.6.8 Off-hook ScanIt can enable/disable the Off-hook Scan. TKR-750/850/751/851 activates the Scan function regardless of thelocal microphone position when this function is enabled.Note: TKR-750/850/751/851 continues scanning without pausingon the revert channel when receiving the transmissioncommand with the TX Disable function. When the Off-hookScan function is disabled, it moves to the revert channel.(Refer to 6.10 Function Port Window.)Function DescriptionLast CalledThe revert channel is assigned to the lastchannel that is received signal and stoppedscanning during scanning and transmit on it.In case of pausing the scan due to changingchannel by PF key, it transmits on thatchannel.During pausing scan due to receiving signal,It is assigned as the revert channel, andtransmits on it.Last UsedThe revert channel is assigned to the lastchannel that is transmitted during scanning.In case of pausing the scan due to changingchannel by PF key, it transmits on thatchannel.While receiving a signal, It transmits on therevert channel.SelectedThe revert channel is assigned to the lastselected channel.In case of pausing the scan due to changingchannel by PF key, it is assigned as therevert channel and transmit on it.While receiving a signal, it changes to therevert channel and transmit.Selected + TalkBackThe revert channel is assigned to the lastselected channel and transmit on it duringscan.In case of pausing scan due to changingchannel by PF key, it transmits on thatchannel.While receiving a signal, It transmits on thecurrent channel.PriorityThe revert channel is assigned to the prioritychannel and transmit on it during scan.Even when pausing scan due to selectingchannel by PF key or receiving a signalduring scan, it transmits on the prioritychannel.Priority + TalkBackThe revert channel is assigned to the prioritychannel and transmit on it during scan.In case of pausing scan due to changingchannel by PF key, it transmits on thatchannel.While receiving a signal, It transmits on thecurrent channel.Range 0.5 - 5.0 sec.In steps of 0.5 sec.Default 3.0 sec.Range 0.5 - 5.0 sec.In steps of 0.5 sec.Default 3.0 sec.RangeChecked Scanning regardless of the localmicrophone position.Unchecked Scanning only when the localmicrophone is in On-hook position.Default Checked