Kenwood TKR-750 Programming Reference Manual

Also see for TKR-750: Brochure & specs Service manual Service manual Function reference Service manual

Version: 1.01 Field Programming Reference (FPRG) 546 EDIT MENU6.11 Multi-table WindowIt can configure the QT/DQT (Current) code on thiswindow. When the Multi-table function is enabled, it canwait for the call with two types of QT/DQT code; Primaryand Current. (Refer to 6.1.6 Multi-table, 6.2.9 Multi-table(Channel Edit).)This window consists of “Main-table” and “Sub-table” tabsand it can switch the window by clicking the tabs.6.11.1 Decode (Multi-table)It can configure the signalling used to receive the calls.Select the QT tone or DQT code from the dropdown list ordirectly enter the QT tone and the DQT code.# Selecting the QT/DQT Encode Code from theDropdown List:# Directly entering the QT/DQT Encode Code:Note:! It cannot configure the QT/DQT code to the No.1 table.! It can use numbers, “D”, “N”, “I”, “.”, and “,” for the 5 digits of theQT/DQT Encode code.! When entering only numbers, the code is configured as QTTone.! When entering “D” as the first character of the code, the code isconfigured as the DQT code.! When entering the value, which is out of the range, it will beautomatically replaced with the highest value or the lowest valuein the range.6.11.2 Encode (Multi-table)It can configure the signalling used to transmit.Select the QT tone or DQT code with the dropdown list ordirectly enter the QT tone and the DQT code.# When Selecting the QT/DQT Encode Code with theDropdown List:# Directly entering the QT/DQT Encode Code:Note:! It cannot configure “Encode” if the “Decode” function is notconfigured.! It can use numbers, “D”, “N”, “I”, “.”, and “,” for the 5 digits of theQT/DQT Encode code.! When entering only numbers, the code is configured as QTTone.! When entering “D” as the first character of the code, the code isconfigured as the DQT code.! When entering the value, which is out of the range, it will beautomatically replaced with the highest value or the lowest valuein the range.RangeQT 67.0 - 250.3 HzDQT Normal D023N - D754NDQT Inverse D023I - D754IDefault NoneRangeQT 67.0 - 254.1 HzDQT Normal D000N - D777NDQT Inverse D000I - D777IIn steps of QT 0.1 HzDQT 1Default NoneRangeQT 67.0 - 250.3 HzDQT Normal D023N - D754NDQT Inverse D023I - D754IDefault NoneRangeQT 67.0 - 254.1 HzDQT Normal D000N - D777NDQT Inverse D000I - D777IIn steps of QT 0.1 HzDQT 1Default None