NEC 1765 Administration Software for NetWare 5–175 NEC 1765 Administration SoftwareLAN Card Parameters Dialog BoxOpen the LAN Card Parameters dialog box by selectingthe LAN Card menu option on the Configure menu orby selecting the LAN Card button in the PrinterAdministration window.The LAN Card Parameters dialog box includes thefollowing information.LAN Card Type: The LAN card’s hardware type.The NEC Ethernet 1183E permits connections toethernet-based networks.MAC Address: The LAN card’s personal networkaddress.Printer Name: The printer can be renamed. You mayuse any combination of upper-case alphanumericcharacters, hyphens (-), and underscores (_) in theprinter name.Firmware Version: The LAN card’s firmwareversion.Serial Number: The serial number of the LAN card.Default Name: The name of the LAN card set at thefactory. The default printer name is “NP_” followedby six digits. An example name is NP_901715.Printer Polling Rate: Sets the frequency in tenths of asecond for how often the LAN card asks the printerfor updated status and configuration information.The range is 20 to 255 tenths of a second and thedefault is 50 tenths of a second. Polling the printertoo frequently will affect the printer’s processingperformance. The default setting provides a goodbalance between polling frequency and systemperformance. Setting the value to 0 will preventupdating.Busy Timeout: Defines the wait time before atimeout when the LAN card queries the printerabout its status and configuration. The range is 15 to255 seconds and the default is 15 seconds.Saves changes and closes dialog boxDiscards changes and closes dialog boxOpens online help about this dialog box
