NEC 1765 Administration Software for NetWare 5–195 NEC 1765 Administration SoftwareScan Interval: Sets the frequency in minutes for howoften the Silentwriter scans the file server. The rangeis 1 to 255 minutes and the default is 5 minutes. If alimited file server has been specified or Scan for FileServers is turned off, the scan interval isautomatically set to 0 minutes.Queue Polling Rate: Sets the frequency in seconds fohow often the Silentwriter verifies the jobs on theprint queue when operating in the Network Printermode. The range is 1 to 255 seconds and the defaultis five seconds.Operating ModeUse these buttons to select either Network Printer orRemote Printer operating mode.Remote Printer InformationPrinter Name: Specifies the name of the remoteprinter displayed on the print server screen of theremote print server (which may be a server or aworkstation). You may use any combination ofupper-case alphanumeric characters, hyphens (-),and underscores (_) in the remote printer name.Printer Number: Specifies the printer number of theselected remote printer.Change Password Dialog BoxYou open the Change Password dialog box by selectingthe Change Password button in the NetWareConfiguration dialog box.Follow these steps to change the printer password.1. Enter the current password in the CurrentPassword text box. If no password has beendefined, as with new printers, leave CurrentPassword blank.2. Type the new password in the New Password textbox.3. Retype the new password in the Confirm Passwordtext entry box.4. Click the Save button to change the password.note: If the new password does not match thepassword defined with PCONSOLE, NetWare will notbe able to access the Silentwriter.
