NetWare with PCONSOLE 4–94 Configuring Your Network PrinterConfigure the Print Server12. In the Print Server Information menu select PrintServer Configuration to move to the Print ServersConfiguration menu.13. In the Print Servers Configuration menu selectPrinter Configuration to move to the ConfiguredPrinters menu.14. Select the first available Not Installed Printer andpress Enter to move to the specific PrinterConfiguration menu. The Printer Configurationmenu name will depend on the number of the NotInstalled Printer you selected. For example, if thefirst available Not Installed Printer was Printer 0,you will move to Printer 0 Configuration menu.15. Backspace over the old name and enter a printername in the Printer Name text box. Users will seethis name on their list of available printers. Thename may be the same as the print server namedefined above, or it may be a name that users willrecognize more easily, for example, NEC Printer 0.16. Move to Type and press Enter.17. The printer type depends on the operating modeyou have chosen.For Ethernet connections- If you selected Network Printer mode, selectDefined Elsewhere from the Printer Typesmenu and press Enter.- If you selected Remote Printer mode, selectRemote Other/Unknown from the PrinterTypes menu and press Enter.For parallel printer connections, you may onlyselect remote printer mode.- Select Parallel, LPT<port> if your printer isconnected to a server running PSERVER.NLM.- Select Remote Parallel, LPT<port> if yourprinter is connected to a DOS workstationrunning PSERVER.EXE.- Select Remote Parallel, LPT<port> if yourprinter is connected to a DOS workstationdifferent from the one that is runningPSERVER.EXE. In this case, the connected DOSworkstation runs RPRINTER.EXE forNetWare 3.1x, or NPRINTER.EXE forNetWare 4.1.See your NetWare manual for more informationabout parallel printer connections.18. Press Esc twice to return to the Print ServerConfiguration menu. Be sure to select Yes whenPCONSOLE asks you to save changes.Configure the Print Queue19. Select Queues Serviced by Printer from the PrintServer Configuration menu to move to the DefinedPrinters menu.20. Select the newly defined printer (NP_015446 in thisexample) and press Insert to move to the File ServerQueue menu.21. Press Insert to move to the Available Queues menu.22. Select the queue you have just created (e.g.,NP_015446_Q), press Enter, and set the priority.Lower priority numbers have higher printingpriority. Usually you will set the priority to 1.23. Use the Esc key several times to leave thePCONSOLE utility.
