2–10 1765 Network Printer Configuration GuideConnecting Twisted Pair CableUnshielded twisted pair (UTP) cable connects to themiddle connector of the LAN card panel.1. Connect one end of the twisted pair cable to themiddle connector on the LAN card panel.2. Connect the other end of the twisted pair cable to aUTP wall outlet or other Ethernet source.Connecting LocalTalk cableLocalTalk cable connects to the top connector of theLAN card panel. You can connect LocalTalk cabledirectly to your Macintosh or to a LocalTalk network.Follow these steps to connect your Silentwriter to aLocalTalk network using RJ-11 cable.1. Connect LocalTalk cable and converter box to thetop connector of the LAN card panel.2. If the Silentwriter is at the end of a LocalTalknetwork, connect RJ-11 cable to one RJ-11connection in the converter box. If necessary,connect a 120-ohm terminator in the other RJ-11connection in the converter box (A).3. If the Silentwriter is in the middle of a LocalTalknetwork, move one cable from a workstation to oneRJ-11 connection in the converter box. Connect anew RJ-11 cable from the Silentwriter to theworkstation (B).Connecting Twisted Pair Cable Connecting LocalTalk Cable
