12.1.5 Mono Audio InputsEach Sound can be configured to receive external stereo or mono audio signals. You may useaudio signals from outside MASCHINE (from your audio interface if MASCHINE is used instand-alone mode, or from your host if MASCHINE is used in plug-in mode).MASCHINE offers either 4 stereo inputs or 8 mono inputs, so each Sound can use one externalmono or stereo input. The same external signal can be fed into any number of Sounds.For example, this allows you to process any external audio signal using the plug-ins loaded in aSound, and more generally, integrate external audio signals into the MASCHINE routing andprocessing system.The external audio inputs for a Sound can be configured on the Audio page of the Sound’s In-put properties.Configuring External Audio Inputs in the Input Properties.For more information on audio routing and sending external audio to Sounds, please readchapter 8 of the MASCHINE Manual.Audio Routing, Remote Control, and Macro ControlsAudio Routing in MASCHINEMASCHINE MIKRO - Manual - 567
