Parameter DescriptionEngage Activates the filter.Frequency Sets the cutoff frequency according to the min/max rangeparameters.FILTERType Selects from Low Pass, Band Pass and High Pass modes.Resonance Sets the resonance of the filter. Values over 100% will leadto self-oscillation—be careful! Turn down the Output Gain(and turn up the Saturation to compensate) in order to avoidextremely loud ringing. Note that the resonance will soundmore pronounced at lower saturation settings and vice versa.Setup PageParameter DescriptionRANGE SectionMin. Freq Sets the lower limit for cutoff frequency.Max. Freq Sets the upper limit for cutoff frequency.SATURATION SectionSaturation Sets the input gain of the filter.Out Level Sets the output gain of the filter.15.7.2 FlangerA comb filter effect with more than a few tricks up its sleeve. Get performance-ready flanger orphaser effects, or expose its wild side – setting higher decay and frequency values unleashesping-pong delay-like flutter effects.Effect ReferencePerform FXMASCHINE MIKRO - Manual - 735
