Setup PageParameter DescriptionROUTINGMix Mode Mix mode sets the routing of the signal:▪ In Mix mode, the dry signal is passed unprocessed andthe wet signal is added on top according to the Wet Levelparameter.▪ In Replace mode, the dry signal is muted after the firstrepetition, leaving only the delay tail audible until the ef-fect is released.▪ In Wet Only mode, the dry signal is muted entirely, whichis useful for placing the effect on a send.Feed Sets the length of the burst of audio to feed into the delayinput whenever the effect is initially activated. Shorter burstlengths (e.g. 100-150ms) are useful for picking out notes ordrum hits. Longer burst lengths (up to a second) can be usedto repeat musical phrases. Set to maximum (>99%), the feedis continuous, deactivating burst mode entirely and simplyfeeding the delay whenever the effect is on.15.7.4 Reso EchoA complex resonant echo with advanced feedback and saturation that verge on psychedelictendencies. Echoes range from a tight, punchy resonant hum to ambiguous howling soundsfrom another dimension.Effect ReferencePerform FXMASCHINE MIKRO - Manual - 740
