5. Click the little field on its left to select a MIDI channel.This is equivalent to the Channel parameter described above.12.2.2 Triggering Scenes via MIDIThe MASCHINE hardware SCENE mode can be configured to send out MIDI (Notes/ProgramChanges) which can be used to trigger scenes. When MASCHINE runs as a Plug-in this MIDIdata is sent to the host application. When MASCHINE runs as a stand-alone application thisMIDI data is send out to all activated MIDI output devices.MIDI Scene Change program change messages can be used to record a Scene performance toa host application, and all recorded Scene performances can be then be saved within your hostand sent back to MASCHINE for playback and trigger Scenes in the recorded order.Sending MIDI Scene Change MessagesTo enable or disable the MIDI Scene Change feature, do the following:1. Click Edit > MIDI Change.2. In the submenu that opens, select the source you want to use for changing the MIDI Pro-gram Change messages. A list of connected controller names appear in the drop-downmenu, or you can select None to disable the feature.3. Then from the drop-down menu select MIDI Note to trigger your Scenes via MIDI notes, orProgram Change to trigger your Scenes via MIDI Program Change messages.Audio Routing, Remote Control, and Macro ControlsUsing MIDI Control and Host AutomationMASCHINE MIKRO - Manual - 579
