12.1.5.2 Configuring External Inputs for Sounds in MASCHINE MIKROAll input channels, including Individual mono L and R channels can be found at the bottom ofthe input selection drop-down menus. The metering of mono inputs is shown as dual-mono.To configure an external input for a Sound:1. Select the Group and Sound for external sound source input.2. Press the F3 button to select SOUND.3. Press and hold the NAV button.4. Press the F2 button to select CHNL. (Channel).5. Turn the Control encoder to select IN or press Pad 13.6. Release the NAV button.7. Turn the Control encoder to select the input source.→ The list of stereo and mono inputs are available for selection.12.2 Using MIDI Control and Host AutomationMASCHINE provides you with flexible MIDI remote control and host automation facilities thatcan be used in many situations.Incoming MIDI and Host AutomationMASCHINE’s Master, Groups and Sounds can be controlled via MIDI and the host (when MA-SCHINE is running as a plug-in), both globally and individually:Audio Routing, Remote Control, and Macro ControlsAudio Routing in MASCHINEMASCHINE MIKRO - Manual - 571
