The ENGINE section.This ENGINE section contains a single parameter: ZERO-X.Parameter DescriptionENGINE Section (Detect mode only)ZERO-X (ZeroCrossing, Detect modeonly)When MODE is set to DETECT, activate ZERO-X to force the detectedSlices to be created on the closest locations where the audio signalcrosses the zero value. This can be helpful to avoid clicks whenplaying back Slices in another sequence.17.4.3 Live SlicingLive Slicing is a quick and intuitive way to add slices to a sample using the pads on your con-troller. The first pad is used to trigger the sample and the subsequent pads are used to addslice points as required. If necessary, the start and end points of the slices can then be fine-tuned using Edit mode.Live Slicing is only available from your MASCHINE controller.17.4.3.1 Live Slicing Using MASCHINE MIKROTo manually add Slices to a sample using the pads on your controller:1. Press the SAMPLING button to enter the Sampling page.2. Press NAV and turn the Control encoder to select SLICE.3. Press an Arrow button below the display screen to select Manual mode.Sampling and Sample MappingSlicing a SampleMASCHINE MIKRO - Manual - 856
