Nokia 6090 AT Command Set 28+CMGF Message FormatThis command tells the TA, which input and output format of messages to use. indicates the format of messages used with send, list, read and writecommands and unsolicited result codes resulting from received messages. Mode canbe either PDU mode (entire TP data units used) or text mode (headers and body ofthe messages given as separate parameters). Text mode uses the value ofparameter specified by command Select TE Character Set +CSCS to informthe character set to be used in the message body in the TA-TE interface. (GSM07.05)Syntax:AT+CMGF=[] Default option is 0.AT+CMGF? Query current setting.Response is +CMGF: AT+CMGF=? Show supported values.Response is +CMGF:(list of supported's)Parameters::0 PDU mode. Default option.1 text modeExamples:To show an incoming SMS on an external Display:AT+CMGF=1AT+CNMI=2,1,0,1,0+CMTI: "SM",1 //received SMS on the 1 st SMS-location on the SIM cardTo show the content of the SMS:AT+CMGR= // read SMS from 1 st SMS-location on the SIM card
