|
Nokia 6090 AT Command Set 31Parameters: length of the actual PDU in octets service centre address followed by GSM03.40 Protocol Data Unit in hexadecimalformat message reference numberExample:AT+CMGF=1;+CMGS="0067800987666”Sets the phone to “text mode” and begins to send a message to 0067800987666.Response:>Enter now the data you want to send, like:Hello, this is a SMS originated from a computer.Response:+CMGS: You have successfully sent a message.(The right network SMSC must be set in the ME or set via +CSCA command)+CMGW Write Message to MemoryThis command stores a message in a preferred memory storage selected withAT+CPMS command. Memory location of a stored message is returned. By default,message status will be set to "STO UNSENT", but parameter also allows other statusvalues to be given. Entering of text is done similarly as specified in command+CMGS Send Message (see page 30). If writing fails, final result code +CMSERROR: is returned.Syntax:text mode (+CMGF=1):AT+CMGW[=[,[,]]]text is entered Response for successful storing:+CMGW: Default option: [,129/145, "STOUNSENT"]PDU mode (+CMGF=0):AT+CMGW=[,]PDU is given Response for successful storing:+CMGW: Default option: [,2]AT+CMGW=? OKParameters: origin or destination address type of origin or destinationaddress,129 for normal and 145 forinternational access (numbercontains '+' character)"REC UNREAD" received unread message"REC READ" received read message"STO UNSENT" stored unsent message (default)"STO SENT" stored sent message location numberExample:AT+CMGF=1;+CMGW="+499501231234”Sets the phone to “text mode” and begins to store a message to +499501231234destination number.Response:>Enter now the data you want to send, like:This is an unsent SMS on my SIM from my computer.
|
