Nokia 6090 AT Command Set 5IntroductionThis document describes the AT commands supported by the Nokia 6090 and theirassociated parameters. A short description, the syntax, the setting values andresponses of the AT commands are presented. An example of use is also providedwhen relevant.Sending a command or a parameter that is not supported by the Nokia 6090 causesan error response.Computers use AT commands to communicate with modems. Most communicationsapplications, however, have a user-friendly interface that hides AT commands fromthe user. You issue AT commands via your communications application. When thesoftware in the Nokia 6090 has received an AT command, it responds with amessage that is displayed on the screen of the device you are using.Note that the "AT" or "at" prefix must be included at the beginning of each commandline.
