Nokia 6090 AT Command Set 48+CSMS Select Message ServiceThis commands selects the messaging service and returns the type of messagessupported. Supported service is specified by GSM 03.40 and 03.41 (service value 0).Main difference between 0 and 1 is that when =1 +CNMA acknowledgement isrequired to most MT short messages routed directly TE. (GSM 07.05)Syntax:AT+CSMS= Select message service.Response is +CSMS: 1,1,1Default setting is 0.AT+CSMS? Query current setting.Response is +CSMS:,,,AT+CSMS=? Show supported services.Response is +CSMS: (0,1)Parameters:, , :0 type not supported1 type supported: mobile terminated messages supported (value 1) or not (value 0): mobile originated messages supported (value 1) or not (value 0): broadcast type messages supported (value 1) or not (value 0)+CSNS Single Numbering SchemeThis command is used to select the bearer service to be used when a call withoutbearer service capability element is received. The command must be given beforethe call comes. Parameter values set with the command +CBST are used when equals to a data service. (GSM 07.07)Syntax:AT+CSNS=[] Set single numbering scheme mode. TheDefault option is 0.AT+CSNS? Query current setting.Response is +CSNS: AT+CSNS=? Show supported modes.Response is +CSNS: (list of supported's).Values for :0 voice (default)2 fax (teleservice 62)4 data+CSQ Signal QualityReturns signal strength as calculated by ME. Bit error rate reporting not supported.(GSM 07.07)Syntax:AT+CSQ Response is +CSQ: , 99AT+CSQ=? Show supported values.Response is +CSQ: (list of supported's), (99)Parameters::0 -113 dBm or less1 -111 dBm2...30 -109... -53 dBm31 -51 dBm or greater99 not known or not detectable
