Nokia 6090 AT Command Set 61O Return to On-Line Data StateThis command is used when you have made a connection with the remote deviceand have escaped (with the +++ command) to the command mode. Give thecommand to return from the (on-line) command mode to normal on-line operation.(V.25ter)Syntax:ATO[] Go to on-line state. Response isCONNECT [].Result CodesPossible verboseresult codes (V1)Numeric(V0) DescriptionCONNECT 1 data/fax call established; rate 300 bps (or Xforbids rate display)CONNECT 1200 5 data/fax call established; rate 1200 bpsCONNECT 2400 10 data/fax call established; rate 2400 bpsCONNECT 4800 11 data/fax call established; rate 4800 bpsCONNECT 9600 12 data/fax call established; rate 9600 bpsERROR 4 command cannot be actionedNO CARRIER 3 call could not be establishedOK 0 command abortedP Select Pulse DiallingThis setting is ignored. It is included for compatibility reasons. (V.25ter)Syntax:ATPQ Result Code SuppressionThis command determines whether responses are sent to the DTE or not. Affectsonly result codes, not information responses. (V.25ter)Syntax:ATQ[0] Enable sending of responses to DTE.Default option.ATQ1 Disable sending of responses to DTES0 Automatic AnswerValue indicates number of rings (RING or +CRING result codes) to wait beforeanswering automatically. Value 0 disables auto-answer. (V.25ter)Syntax:ATS0= Values for are 0..255 (default 0).ATS0? Query current setting.Response is .S1 Ring CountReturns number of rings (RING or +CRING result codes) counted after last MT callsetup. (De facto.)Syntax:ATS1? Query current setting.Response is . Values for are000..255.
