|
Nokia 6090 AT Command Set 41+CPMS Preferred Message StorageThis command selects memory storages to be used for reading/deleting ,writing/sending , and receiving short messages. Amount of usedand available message locations in each memory is returned as response. (GSM07.05)Syntax:AT+CPMS=[,< mem2>[, ]]Select preferred storage.Response is +CPMS: , ,, , , Default option is "SM","SM","SM"AT+CPMS? Current setting query.Response is +CPMS: , ,, , , ,, , AT+CPMS=? Show supported values.Response is+CPMS: (list of locations), (list of locations), (listof locations)Parameters: "ME""SM" "ME""SM" "SM"+CPWD Change PasswordChanges passwords of SIM/ME/network features. "AB" = network/barring password.(GSM 07.07)Syntax:AT+CPWD=,,AT+CPWD=? Show supported values.:"PS" PH-SIM (lock PHone to SIM card) (MEasks password when other than currentSIM card inserted)"SC" SIM (lock SIM card) (SIM asks passwordin ME power-up and when this lockcommand issued)"AB" All Barring services (GSM 02.30)"P2" SIM PIN2, : string type; shall be the same as passwordspecified for the facility from the ME user interface or with command ChangePassword +CPWD and is the new password; maximum length ofpassword can be determined with : integer type maximum length of the password for the facilityExamples:AT+CPWD=?Show supported valuesResponse:+CPWD: ("PS",5),("SC",8),("AB",4),("P2",8)OKAT+CPWD="PS","12345","21345"changes “Security code” from the old 12345 value, to 21345.AT+CPWD="SC","0000","12345678"changes “PIN code” from the old 0000 value, to 12345678.
|
