|
Nokia 6090 AT Command Set 332 alternating voice/data (bearer service 61)3 voice followed by data (bearer service 81)+CMSS Send Message from StorageThis command sends a message with the location value from a preferredmessage storage selected with AT+CPMS command (see page 41). If a newrecipient address is given, it shall be used instead of the one stored with themessage. Reference value is returned to DTE on successful message delivery.(GSM 07.05)Syntax:AT+CMSS=[, [,]] Responses:text mode (+CMGF=1) and sending ok:+CMSS: [,]PDU mode (+CMGF=0) and sending ok:+CMSS: [,]: [,"",129/145]AT+CMSS=? OKParameters: location number message reference number destination address type of destination address, 129 fornormal and 145 for international access('+' character automatically added toaddress)Example:AT+CMSS=1Sends the message on index 1 to the da address, which is in the message.Response:+CMSS: You have successfully sent this message.+CNMA New Message Acknowledgement to ME/TAThis command confirms correct reception of a new message (SMS-DELIVER orSMS-STATUS-REPORT) which is routed directly to the TE. This acknowledgementcommand (causing ME to send RP-ACK to the network) is used when +CSMS (seepage 48) parameter equals 1. TA does not send another +CMT or +CDSresult code to TE before previous one is acknowledged. If ME does not getacknowledgement within required time (network timeout), ME send RP-ERROR tothe network. ME/TA automatically disable routing to TE by setting both and values of +CNMI to zero. (GSM 07.05 PDU entering as specified in GSM07.05).Syntax:text mode (+CMGF=1):AT+CNMAPDU mode (+CMGF=0):AT+CNMA[=[,[PDU is given]]]AT+CNMA=? Show supported values.Response for PDU mode (+CMGF=0) is:+CNMA: (0-2)Parameter::0 command operates similarly as defined forthe tect mode1 send RP-ACK2 send RP-Error
|
