Nokia 6090 AT Command Set 57+IPR Fixed DTE RateThis command specifies the data rate at which the Nokia 6090 will acceptcommands. Nokia 6090 does not support autobauding. Note that reset commands Zand &F do not change this setting.Syntax:AT+IPR= Set DTE rate. Default is 19200.AT+IPR? Query current setting.Response is +IPR: .AT+IPR=? Show valid range of rate.Response is +IPR:(list of supported's).Values for :960019200 19200 bps is the default value. Pleasenote that the Nokia 6090 will always bootusing this value.3840057600115200+VTS DTMF GenerationThis command is used to send DTMFs. Also the dialling command can be used tosend DTMFs (see command D Dial, page 58). (PN-3131)Syntax:AT+VTS=[[,,...]]AT+VTS=? Show supported values.Response is ( ),( ),( )+WS46 Select Wireless NetworkCurrently there are no values for DCS1800 or PCS1900 but the option '12' could alsobe used for them. (GSM 07.07, TIA-678)Syntax:AT+WS46=[12] Select wireless network.AT+WS46? Query current setting. Response is 12.AT+WS46=? Show options. Response is (12).
