Nokia 6090 AT Command Set 54+ETBM Call Termination Buffer ManagementThis command controls how data remaining in DCE buffers is handled when a call isdisconnected. If the call is disconnected locally, parameter controls whetherthe call is disconnected at once or is it delayed until all sent data is delivered or timerexpires. If the call is disconnected at remote end, parameter controlswhether the call disconnection response is sent to DTE at once or is it delayed untilall received data is delivered to DTE or timer expires. These settings may also beused in non-transparent data call buffer management. (V.25ter)Syntax:AT+ETBM=[[,[,]]]Set buffer management parameters.Default option is 2, 2, 20.AT+ETBM? Query current setting.Response is +ETBM: , ,.AT+ETBM=? Show supported values.Response is +ETBM: (list of supported’s), (list of supported ’s),(list of supported ’s).Parameters:0 Discards all data in transmit buffer anddisconnect.1 Wait until all data in transmit buffer is sent.If remote end disconnects discardremaining data.2 Wait until all data in transmit buffer is sent.If remote end disconnects or timer expiresdiscard remaining data. (default)0 Discards all data in receive buffer anddisconnect.1 Wait until all data in receive buffer is sentto DTE. If local end disconnects discardremaining data.2 Wait until all data in receive buffer is sentto DTE. If local end disconnects or timerexpires discard remaining data. (default) timeout value in seconds for data delivery(0 - 30, default 20)+GCAP Request Complete Capabilities ListThis command displays product information on the overall capabilities of the Nokia6090. (V.25ter)Syntax:AT+GCAP Display product capabilities.Response is +GCAP:+CGSM,+FCLASS,+DS+GMI Request TA Manufacturer IdentificationThis command displays the TA manufacturer identification.(V.25ter)Syntax:AT+GMI Display manufacturer identification.Response is Nokia Mobile Phones
