H OTS POT GATEWAYSystem Administration 113In Room Port MappingThis section shows In Room Port Mapping from the subscriber side, when the InRoom Port Mapping feature is enabled.1. Enable In Room Port Mapping and assign a user name and password (seeprevious section, Steps 2 and 3).2. Enter the following URL target format:http://(HSG IP address):1111/usg/roommappingFor example:http://219.57.108.103:1111/usg/roommappingThe Enter Network Password prompt appears:HSG multiple VLAN tagged systems can use the same tags and beplaced on different Subscriber ports. Although it is technicallypossible to place two different VLAN tagged switches (one on eachSubscriber side) that have the same VLAN tags designated, thisconfiguration can cause problems. To avoid conflicts, you must ensurethat the VLAN tags are different on the different devices.Click here if you want to saveyour user name and passwordEnter user name andpassword
