H OTS POT GATEWAYInstalling the HSG 33Logging In to the Command Line InterfaceUse this procedure to initialize the system and log in to the HSG’s Command LineInterface (CLI). The character-based CLI is used at initial start-up.1. Start a HyperTerminal™ session to connect to the HSG. Use the followingHyperTerminal settings:2. When connected to the HSG, a login prompt appears on your screen.The default login user name is “admin.” The password is “admin.” Login namesand passwords are case-sensitive.3. Enter admin when prompted for a user name and password. The HSG Menuappears when you have logged in to the HSG’s management interfacesuccessfully. If this is an initial installation which requires the HSG to receive alicense key from the Nomadix License Key Server, you must accept theNomadix End User License Agreement (EULA).Bits per second 9600Data bits 8Parity NoneStop bits 1Flow control None
