H OTS POT GATEWAYSystem Administration 73Defining Automatic Configuration Settings {Auto Configuration}The HSG allows you to define parameters to enable the automatic configuration ofthe system. See also, “RADIUS-driven Auto Configuration” on page 16.1. From the Web Management Interface, click on Configuration, then AutoConfiguration.The Autoconfiguration Settings screen appears:2. Enable or disable Autoconfiguration, as required.3. If you enabled Autoconfiguration, you must enter the following information intothe corresponding fields:z RADIUS Authentication Namez Radius Passwordz Confirm Password4. Click on the check box for Reboot after changes are saved? to reboot thesystem when you submit your changes.5. Click on the Submit button to save your changes, or click or the Reset button toreset all data to its previous state.
